VERTICAL WASTE BALERS
BALER 40
A ‘mini-baler’ for everyday use, the smallest baling machine in the range.
Ideal for bailing cardboard, plastic and even general waste requires minimal floor space.
Great for garage forecourts, industrial units, schools, restaurants, pubs, take-aways and retail outlets.
12 months parts and labour warranty.
CE marked and approved.
BALER 60
Powered from a standard 13 amp plug and with a larger than average loading aperture (0.64m x 0.70m), the Baler 60 exerts maximum pressure to produce bales weighing up to 75kg.
This model is ideal for baling both cardboard and plastic as well as dry waste and 20 litre steel drums.
12 months parts and labour warranty.
CE marked and approved.
BALER 100
Powered from a standard 13 amp plug, the Baler 100 exerts maximum pressure to produce bales weighing up to 150kg. This mid-range model has an extended loading aperture to allow for larger boxes and fast through put. It’s retaining teeth make it ideal for baling both cardboard and plastic.
12 months parts and labour warranty.
CE marked and approved.
BALER 200
This baler is powered by a 16 amp single phase plug with an extra large loading aperture producing half sized mill bales weighing up to 250kg.
An ideal machine for baling medium to high quantities of cardboard and plastic for maximum return values.
12 months parts and labour warranty.
CE marked and approved.
BALER 400
This is a powerful unit which has an auto-eject system and evenly applies pressure across the bale via twin rams, turning your recyclable materials into ‘wire-tied’ mill size bales up to 500kg (dependent on waste stream) optimising rebate values and greatly reducing waste disposal costs.
12 months parts and labour warranty.
CE marked and approved.
BALER 500
This machine has an extra large loading aperture 1.5m wide x 0.88m high allowing fast through put of voluminous and bulky recyclable materials, turning your waste stream into dense wire tired mill size bales which weigh between 500 – 600kg to achieve maximum rebate values.
12 months parts and labour warranty.
CE marked and approved.
BALER 500 HD
The Baler 500HD heavy duty baler has extra long rams to produce far denser bales than any standard baler. The entire frame-work of this model is reinforced and it has been fitted with our unique bale retaining system, allowing it to handle harder to bale materials such as car tyres and car bumpers.
12 months parts and labour warranty.
CE marked and approved.
BALER 600
This super-powerful unit exerts maximum pressure on your recyclable materials, turning them into extra-large mill size bales weighing up to 650kg, increasing rebate values and greatly reducing waste disposal costs.
12 months parts and labour warranty.
CE marked and approved.
TC 60 & TRC 60
Twin or Triple Chamber Baler – Produces bales up to 75kg
Powered from a standard 13 amp plug with two or three large loading apertures, the Baler TC60 and TRC60 exert maximum pressure to produce bales weighing up to 70kg. These models can be used for baling cardboard, plastics and even general waste. Ideal for the segregation of materials at source. Saves handling time with multiple bale chambers: free to load while other chamber compacts.
TC 200 & TRC 200
Twin or Triple Chamber Baler – Produces bales up to 200kg
With two or three large loading apertures, the Baler TC200 and TRC200 exert maximum pressure to produce bales weighing up to 200kg. These models can be used for baling cardboard, plastics and even general waste. Ideal for the segregation of materials at source. Saves handling time with multiple bale chambers: free to load while other chamber compacts.